Land O' Lakes Cabinet Refacing logoLand O' Lakes Cabinet RefacingLand O' Lakes, FL
Menu
crown molding addition in Land O' Lakes, FL

Land O' Lakes Cabinet Refacing

Crown Molding Addition in Land O' Lakes, FL

Crown molding addition in Land O' Lakes finishes the gap above cabinets with a matched profile and free estimate.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Land O' Lakes and nearby communities.

A gap above the upper cabinets is one of the easiest things to fix and one of the easiest to botch. Crown molding addition closes that gap with a profile cut and finished to match your cabinet doors, not a generic strip bolted on and hoping for the best.

Land O' Lakes Cabinet Refacing treats this as its own scoped job, whether it's paired with a full refacing project or added on its own to cabinets that never had molding to begin with.

What's included

What's included with Crown Molding Addition

Typically included: molding profile selection, precision cutting and mitering for your cabinet run, finish matching to existing or new doors, mounting and seam caulking.

Optional: lighted cove detail above molding, matching end caps on exposed cabinet sides, extending molding across adjacent soffits.

Customer prep: clear countertops below the work area and confirm ceiling height if molding will run close to a soffit or bulkhead.

How it works

How our Crown Molding Addition process works

  1. Space Measurement photo
    Step 1

    Space Measurement

    Cabinet tops are measured to determine molding length and angles needed.

  2. Molding Style Selection photo
    Step 2

    Molding Style Selection

    Clients choose molding profiles that complement their cabinet design.

  3. Cutting and Fitting photo
    Step 3

    Cutting and Fitting

    Molding pieces are cut to precise angles for proper corner fitting.

  4. Surface Preparation photo
    Step 4

    Surface Preparation

    Cabinet tops are prepared to ensure secure molding attachment.

  5. Molding Installation photo
    Step 5

    Molding Installation

    Molding is attached and secured along the tops of cabinet runs.

  6. Finish Touch-Ups photo
    Step 6

    Finish Touch-Ups

    Seams and edges are finished to blend molding with existing cabinetry.

Materials

Materials and methods for Crown Molding Addition

Molding needs to survive Florida's AC cycling without the seams opening up a year later, so finish and fastening matter as much as the profile itself.

  • Crown Molding Profiles photo

    Crown Molding Profiles

    A range of molding profiles add decorative detail above cabinetry, scaled to the ceiling height common in open-concept Land O' Lakes kitchens.

  • Wood Molding Strips photo

    Wood Molding Strips

    Solid wood strips provide a traditional, durable molding option that holds a finish match longer than composite alternatives.

  • Molding Adhesive photo

    Molding Adhesive

    Strong adhesive secures molding firmly to cabinet surfaces so it doesn't loosen as humidity shifts through the seasons.

  • Finish Nails photo

    Finish Nails

    Finish nails provide additional support for molding installation, backing up the adhesive on longer runs.

  • Matching Stain or Paint photo

    Matching Stain or Paint

    Finish is matched to existing cabinetry for a cohesive appearance instead of an obvious add-on look.

  • Corner Molding Blocks photo

    Corner Molding Blocks

    Corner blocks simplify fitting at complex cabinet angles, common where islands or peninsula cabinets meet at odd corners.

Timeline

How long does crown molding addition take?

Most molding jobs move fast since there's no box prep involved, just measuring, cutting, and mounting.

  1. 01

    Consult and measure

    same day
  2. 02

    Material and profile order

    2-5 business days if a specific profile isn't in stock

  3. 03

    Install

    1 day

    for a standard kitchen run

Need a schedule that fits?

Get a Free Estimate

Cost

What does crown molding addition cost in Land O' Lakes?

Cost runs mostly on linear footage and how closely the finish needs to match existing or new cabinet doors. Call or request a free estimate and we'll measure your cabinet run before quoting a number.

Project typeTypical rangeWhat’s included
Standard profile, stain-matched$8-$15per linear foot, basic profile cut and finished to match existing wood tone.
Painted finish match$10-$18per linear foot, includes primer and topcoat to match painted cabinet doors.
Complex angles or soffit runs$18-$28per linear foot, extra mitering for peninsula corners or stepped ceilings.

These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.

Want a number for your home?

Get a Free Estimate

Codes & permits

Permits and codes for Crown Molding Addition

Pasco County rules can vary by project scope, so confirm with your local building department if you're unsure.

Typically needs a permitOften no permit
No typical permit triggers for standard crown molding addition since it's a surface-level cosmetic installMolding attached directly to existing cabinet tops with no structural changes
—Finish matching or repainting molding to coordinate with new cabinet doors
—Adding molding to cabinets that never had it
—without altering cabinet height or layout

DIY vs pro

DIY vs hiring a pro for Crown Molding Addition

DIYHire a pro
Fine for a single short run with simple butt joints and no inside corners.Worth it for any run with inside or outside corners, since mitering angles correctly takes practice.
Pre-finished molding strips from a home store can work for a quick, low-visibility area.A pro matches finish to existing cabinet doors instead of an obvious mismatch.
Risk is mostly cosmetic: gaps at miters are easy to see once painted.Saves a redo when ceiling height isn't perfectly level, which is common even in newer builds.

When to call

When to call for Crown Molding Addition

Call (656) 206-7425 or request a free estimate and we'll quote the exact linear footage for your kitchen.

  • Cabinets were installed without molding and the gap above collects dust.
  • You're refacing cabinets and want the finished look to include a capped top.
  • Existing molding has gaps, yellowing, or doesn't match a recent door replacement.

Before & after

Before and after Crown Molding Addition

  • crown molding addition in Land O' Lakes, FL
    Before
  • crown molding addition in Land O' Lakes, FL
    After

FAQs

Crown Molding Addition FAQs

What is the most expensive part of redoing a kitchen?

Door material and box veneer carry most of the cost in a kitchen update. Crown molding is a smaller line item by comparison, usually priced per linear foot rather than per door.

Does crown molding work with any cabinet style?

Most profiles pair with shaker, raised panel, or flat-panel doors. We match the profile scale to your cabinet style during the estimate.

Can you match molding to cabinets that are already refaced?

As long as we have the finish sample or can match the stain/paint color closely on site.

Does adding molding require removing the cabinets?

Molding mounts to the top of existing cabinet boxes without disturbing doors or hardware below.

How long does the finish need to cure before use?

Stained or painted molding typically needs a few hours to a day before the kitchen is back to normal use, depending on the finish.

Will molding close the gap if my ceiling isn't level?

We scribe and cut to follow minor ceiling variation so the gap closes cleanly.

Ask about Crown Molding Addition

Tell us about the project and how to reach you.

Call (656) 206-7425